Dnsconfig - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

dnsConfig

dnsConfig
Sets, displays, or removes domain name service (DNS) parameters.
SYNOPSIS
dnsconfig
dnsconfig --add -domain name -serverip1 ipaddr serverip2 ipaddr
dnsconfig --delete
dnsconfig --show
dnsconfig --help
DESCRIPTION
Use this command to display, set, or remove the domain name service parameters.
The domain name service parameters are the domain name and the name server IP address for primary
and secondary name servers. The dnsconfig command displays IPv4 and IPv6 addresses.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
--add
-domain name
-serverip1 ipaddr
-serverip2 ipaddr
--delete
--show
--help
EXAMPLES
To set the DNS parameters for the system:
248
Sets the DNS configuration.
Specifies the DNS domain name.
Specifies the DNS primary server IP address. The IP address can be an IPv4 or
IPv6 address.
Specifies the DNS secondary server IP address. The IP address can be an IPv4
or IPv6 address.
Removes the DNS configurations.
Displays the current DNS configuration.
Displays the command usage.
switch:admin> dnsconfig
Enter option
1 Display Domain Name Service (DNS) configuration
2 Set DNS configuration
3 Remove DNS configuration
4 Quit
Select an item: (1..4) [4] 2
Enter Domain Name: [] domain.com
Fabric OS Command Reference
53-1002746-01