Perfmonitorshow - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

perfMonitorShow

perfMonitorShow
Displays end-to-end and interswitch link performance monitors on a port.
SYNOPSIS
perfmonitorshow --class monitor_class
[slot/]port [interval]
DESCRIPTION
Use this command to display End-to-End (EE) performance monitors on a port. If interval is specified, the
command displays a snapshot of the traffic at the specified interval. If no interval is specified, this
command displays the following information:
Key
SID
DID
Owner_app
Tx_count
Rx_count
Owner_ip_addr
NOTES
ISL Monitors are deprecated as of Fabric OS v7.0.0. Management of filter-based monitors is no longer
supported with this command; it is now provided through the Frame Monitor management interface
(fmMonitor).
This command requires an Advanced Performance Monitoring license.
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE
ports.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
--class monitor_class
slot
port
604
The monitor number.
The source Port ID.
The destination Port ID.
The owner application: TELNET, WEB_TOOLS, or API.
The number of FC words transmitted.
The number of FC words received.
The IP address of the originator that created the EE monitor. Displays the IPv6
address if applications pass the IP address while adding the monitor. If the
monitor is added using performance monitor commands, this field displays N/A.
Specifies the monitor class as one of the following: EE (end-to-end) or ISL
(interswitch link). These values are case-sensitive.
For bladed systems only, specifies the slot number of the port on which to display
the monitor, followed by a slash (/).
Specifies the number of the port on which to display the monitor, relative to its slot
for bladed systems. Use switchShow for a listing of valid ports.
Fabric OS Command Reference
53-1002746-01