Portlogresize - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

portLogResize

portLogResize
Resizes the port log to include a specified number of entries.
SYNOPSIS
portlogresize num_entries
DESCRIPTION
Use this command to resize the port log to include a specified number of entries. If the specified number
of entries is less than the already configured port log size, there is no change.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
num_entries
EXAMPLES
To resize the portlog:
SEE ALSO
portLogConfigShow
764
Specifies the number of port log entries. The valid range of values is 32,768 to
13,1072 for the Brocade Encryption Switch, DCX, and DCX-4S. For all other
platforms, the range is 16,384 to 32,768.
switch:admin> portlogresize 17288
Fabric OS Command Reference
53-1002746-01