Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 217

--show -mkexported_keyids key_id
--show -groupcfg
--show -groupmember
--show -egstatus
--sync -encgroup
--sync -securitydb
--perfshow
Fabric OS Command Reference
53-1002746-01
-srcfile filename
Specifies the file name when restoring the master key from a file in the
predetermined directory on the switch. Use this operand when the master key was
backed up to a file rather than to a key vault. The -keyID and the -srcfile
operands are mutually exclusive.
Displays all exported key IDs used to store a particular master key on keyvault.
The key ID must be in the format displayed in the output of the cryptocfg --show
-localEE command. This command is valid on any node connected to the key
vault.
Displays the group-wide encryption policy configuration. This command is valid on
all member nodes and on the group leader.
Displays detailed information for all encryption group members or for a single
member. This command is valid on all member nodes and on the group leader.
The following required operands are mutually exclusive:
-all
Displays information on all nodes in the existing encryption group.
node_WWN
Displays information on a single specified node. The node is identified by its node
WWN.
Displays encryption group configuration or status information for all nodes in the
encryption group. The following operands are exclusive:
-cfg
Displays encryption group configuration information.
-stat
Displays encryption group status information.
Manually synchronizes the encryption group database belonging to the group
leader node with the databases of all member nodes that are out of sync. If this
command is invoked when the encryption group databases are in sync, the
command is ignored.
Note: When the encryption group is out of sync and the group leader reboots, the
newly selected group leader pushes its database information to all other
members. The new group leader's database information may be different from
what was set up before the group leader was rebooted.
Distributes the security database from the group leader node to all member
nodes. This operation can resolve problems with master key propagation. The
synchronization occurs every time this command is executed regardless of
whether or not the security database was in sync across all nodes in the
encryption group. This command is valid only on the group leader.
Displays the encryption performance.
slot
Displays the encryption performance for specified slot.
-tx
Displays the transmitter throughput.
2
cryptoCfg
189