Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 834

2
portShow
EXAMPLES
To display FCIP tunnel configuration parameters on the Brocade 7800 with Ficon enabled:
To display an FCIP tunnel with FICON disabled:
806
-rte
Displays the current Routing Info SE memory.
switch:admin> portshow fciptunnel 16
-------------------------------------------
Tunnel ID: 16
Tunnel Description:
Admin Status: Enabled
Oper Status: Up
Compression: On (Aggressive)
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Disabled
QoS Percentages: High 50%, Med 30%, Low 20%
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:a5:54:bd
Peer WWN: 00:00:00:00:00:00:00:00
Circuit Count: 4
Flags: 0x00000000
FICON: On
FICON XRC: Off
FICON Tape Write: On
FICON Tape Read: On
FICON TinTir Emul: On
FICON Dvc Acking: On
FICON Read BLK-ID: On
FICON Teradata Write: On
FICON Teradata Read: On
Tape Write Pipe: 63
Tape Read Pipe: 65
Tape Write Devs: 32
Tape Read Devs: 32
Tape Write Timer: 300
Tape Max Chain: 3200000
FICON OXID Base: 0x8000
FICON Debug Flags: 0xf7c90000
switch:admin> portshow fciptunnel 16
-------------------------------------------
Tunnel ID: 16
Tunnel Description:
Admin Status: Enabled
Oper Status: Up
Compression: On (Aggressive)
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Disabled
QoS Percentages: High 50%, Med 30%, Low 20%
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:a5:54:bd
Peer WWN: 00:00:00:00:00:00:00:00
Circuit Count: 4
Flags: 0x00000000
FICON: Off
Fabric OS Command Reference
53-1002746-01