Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 504

2
ipFilter
To create an IPv4-type IP filter policy:
To add a rule to the created policy "ex2":
To display the IP filter policies, including the new policy:
To save the IP Filter policy "ex2" (the status of the policy changes from modified to defined after the
policy is saved):
476
11 any
12 any
Name: default_ipv6, Type: ipv6, State: defined
Rule Source IP
1 any
2 any
3 any
4 any
5 any
6 any
7 any
8 any
9 any
10 any
11 any
12 any
Name: ex1, Type: ipv6, State: active
Rule Source IP
1 fec0:60:69bc:60:260:69ff:fe80:d4a tcp 23
switch:admin> ipfilter --create ex2 -type ipv4
switch:admin> ipfilter --addrule ex2 -sip 10.32.69.99 \
-dp 23 -proto tcp -act permit
switch:admin> ipfilter --show
Name: default_ipv4, Type: ipv4, State: active
Name: default_ipv4, Type: ipv4, State: active
Rule Source IP
1 any
2 any
3 any
4 any
5 any
6 any
7 any
8 any
9 any
10 any
11 any
12 any
Name: ex2, Type: ipv4, State: defined (modified)
Rule Source IP
1 10.32.69.99
switch:admin> ipfilter --save ex2
tcp 600 - 1023 permit
udp 600 - 1023 permit
Protocol Dest Port
tcp 22
tcp 23
tcp 897
tcp 898
tcp 111
tcp 80
tcp 443
udp 161
udp 111
udp 123
tcp 600 - 1023 permit
udp 600 - 1023 permit
Protocol Dest Port Action
Protocol Dest Port
tcp 22
tcp 23
tcp 897
tcp 898
tcp 111
tcp 80
tcp 443
udp 161
udp 111
udp 123
tcp 600 - 1023 permit
udp 600 - 1023 permit
Protocol Dest Port Action
tcp 23
Action
permit
permit
permit
permit
permit
permit
permit
permit
permit
permit
permit
Action
permit
permit
permit
permit
permit
permit
permit
permit
permit
permit
permit
Fabric OS Command Reference
53-1002746-01