Fcplogshow - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

fcpLogShow

fcpLogShow
Displays the FCPD debug information log.
SYNOPSIS
fcplogshow
DESCRIPTION
Use this command to display the debug information logged at various stages during the Fibre Channel
Protocol daemon (FCPD) device probing.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display the FCPD debug information log:
SEE ALSO
fcpLogClear, fcpLogDisable,
316
switch:admin> fcplogshow
Switch 0; Sat Dec 18 14:22:05 2010
14:22:05.799269 Flush or Probe rcvd, port 15, \
Line: 16777862, scn_type: 2
14:22:05.799279 Probe flush, port:15, \
Line:16780554, flag:0
14:22:17.469561 Flush or Probe rcvd, port 15, \
Line: 16777862, scn_type: 1
14:22:17.469567 Probe Msg Rcvd, port: 15, Line: 16777899, \
prev_state: 0, msg_scn_arg1: 0
14:22:17.470618 fcpStartProbe, port: 15, line: 16778347, \
async_state: 1, origin: 0,probe_state: 0, opt_code: 0
14:22:17.471052 fcpStartProbe, port: 15, line: 16778413, \
async_state: 1073741824, origin: 0,probe_state: 0, opt_code: 0
14:22:17.471057 Probe flush, port:15, Line:16780554, flag:1
(output truncated)
fcpLogEnable
Fabric OS Command Reference
53-1002746-01