Portcfgcreditrecovery - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

portCfgCreditRecovery

portCfgCreditRecovery
Enables or disables credit recovery on a port.
SYNOPSIS
portcfgcreditrecovery --enable [slot/]port
portcfgcreditrecovery --disable [slot/]port
portcfgcreditrecovery --help [slot/]port
DESCRIPTION
Use this command to enable or disable credit recovery on a port.
The credit recovery feature enables credits or frames to be recovered. The default credit recovery
configuration is enabled.
NOTES
This command is supported in Access Gateway mode in Fabric OS v7.1.0 and later.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
The Fabric OS port configuration commands are not supported on FCoE ports.
OPERANDS
This command has the following operands:
--disable
--enable
--help
EXAMPLES
To enable credit recovery on a port:
To disable credit recovery on a port:
SEE ALSO
portCfgShow
660
Disables credit recovery configuration on the specified port.
Enables credit recovery configuration on the specified port.
Displays the command usage.
switch:admin> portcfgcreditrecovery --enable 3/15
portcfgcreditrecovery --disable 3/15
Fabric OS Command Reference
53-1002746-01