Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 229

In addition, this command set includes the following display commands. Output may vary depending on
your configuration. Refer to the Appendix of the Fabric OS Encryption Administrator's Guide for a more
comprehensive explanation of system states.
Use the --show -container -all -stat command for runtime status information on all CryptoTarget
containers in the encryption group. The display includes the following information:
•
•
•
Fabric OS Command Reference
53-1002746-01
Encryption group name: user-define label
Number of containers numeric value
For each container:
-
Container name: user-defined label
-
Type: disk or tape
-
EE node: The node WWN
-
EE slot: the slot number for the encryption engine
-
Target: The target port WWN
-
Target PID: The target PID
-
VT: The virtual target port WWN
-
VT PID: The virtual target PID
-
Number of hosts: numeric value
-
Number of tape sessions (or rekey sessions): numeric value
-
Host: The port WWN
-
Host PID: The host PID
-
VI: The virtual initiator port WWN
-
VI PID: The virtual initiator PID
-
Number of LUNs: numeric value
-
LUN number: numeric ID
-
LUN type: disk or tape drive, tape medium changer, tape attached medium changer, tape
offline/unknown, or unsupported/other
-
LUN serial number: The LUN serial number
-
Encryption mode: encrypt or cleartext
-
Encryption format: (brocade) native or DF-compatible
-
Tape policy type: pool-based, LUN-based
-
Encrypt existing data: disabled or enabled
-
Rekey: disabled or enabled
-
Key life: the key life span (in days)
-
Volume/Pool label: the label for the tape volume or tape pool
-
Internal EE LUN state: Encrypted, Cleartext, or Disabled (Data state is cleartext but metadata
exists on the LUN, or vice versa.)
-
Encryption algorithm: AES256-ECB (DF_compatible), AES256-GCM (native) or None
(cleartext)
-
Key ID state: Read, Write, or Key ID not applicable
-
Key ID: The Key ID (if available)
-
New LUN: Yes or No
-
Replication LUN type: Primary or Mirror
-
Tape session number: numeric value
-
Number of uncompressed blocks: numeric value
2
cryptoCfg
201