Myid - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

myId

myId
Displays the current login session details.
SYNOPSIS
myid
DESCRIPTION
Use this command to display the status of the system and the login session details. This includes IPv4 or
IPv6 addresses associated with the login session.
The login session gives details of the following:
•
•
•
•
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display current login information:
SEE ALSO
version
548
CP/switch (or console/serial port) used to log in.
The IP address of the current login session for Telnet or the name of the current console port or the
serial port (if modem login used).
The current CP mode (Active, Standby, or Unknown).
The current system status (Redundant, Nonredundant, or Unknown).
switch:admin> myid
Current Switch: switch
Session Detail: switch (123.123.123.123) Active Redundant
Fabric OS Command Reference
53-1002746-01