Msplcleardb - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

msPlClearDB

msPlClearDB
Clears the Management Server (MS) platform database on all switches in the fabric.
SYNOPSIS
msplcleardb
DESCRIPTION
Use this command to clear the MS platform database in the entire fabric. Because this operation cannot
be undone, it should not be performed unless it is intended to resolve a database conflict between two
joining fabrics or to establish an entirely new fabric with an empty database.
NOTES
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
This command is supported only in AD0 and AD255 contexts.
OPERANDS
None
EXAMPLES
To clear the MS platform database:
SEE ALSO
msCapabilityShow, msConfigure, msPlatShow, msPlatShowDBCB, msPlMgmtActivate,
msPlMgmtDeactivate
542
switch:admin> msplcleardb
MS Platform Service is currently enabled.
This will erase MS Platform Service Database in the\
entire fabric.
Would you like to continue this operation?
(yes, y, no, n): [no] y
Request to MS Platform DB Clear operation in progress...
*Completed clearing MS Platform Service Database!!
Fabric OS Command Reference
53-1002746-01