Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 153

OPERANDS
This command has the following operands:
-db ipfilter
EXAMPLES
To distribute the IP Filter policies to all chassis that are connected through the logical fabric 128 and
support the distribute feature:
To distribute the IP Filter policies to all switches in the fabric that support the distribute feature (Virtual
Fabrics are disabled on the evoking switch):
SEE ALSO
distribute,
Fabric OS Command Reference
53-1002746-01
Specifies the policy database to be distributed with this command. The only
accepted value for -db is ipfilter. The database name is case insensitive. The
legacy notation ("IPFILTER") still works but is not neccessary. The following
operands are mutually exclusive:
-fid target_FID
Specifies the target logical switch for the distribution. The logical switch is
identified by its fabric ID (FID). When a FID is specified, the database is
distributed to all chassis that are connected to the specified logical switch (FID)
and are configured to accept the distribution. This operand is required and valid
only when the originating switch is in Virtual Fabric mode.
-domain target_domain_list
Specifies a list of target switch domain IDs that should receive the database. The
list must be enclosed in double quotation marks; members must be separated by
a semicolon. A wildcard (*) may be specified to include all switches in the fabric
that support the distribute feature. This operand is required and valid only when
Virtual Fabrics are disabled.
-force
Distributes the database without confirmation.
switch:admin> chassisDistribute -db ipfilter -fid 128
FID DOMAIN CHASSISWWN
---------------------------------------------------------
128 3 10:00:00:05:1e:38:ac:0e
NON-VF 4 10:00:00:05:1e:39:bd:0f
128 98 10:00:00:05:1e:41:22:9f
chassisDistribute will distribute the database(s) to \
above topology.
Would you like to continue [Y/N] : y
ChassisDistribute operation succeeded for above topology
switch:admin> chassisDistribute -db ipfilter -domain "*"
FID DOMAIN CHASSISWWN
--------------------------------------------------------
128 3 10:00:00:05:1e:38:ac:0e DCX_93
NON-VF 4 10:00:00:05:1e:39:bd:0f Brocade300
128 98 10:00:00:05:1e:41:22:9f Brocade6510
ChassisDistribute will distribute the database(s) to \
above topology.
Would you like to continue [Y/N] : y
ChassisDistribute operation succeeded for above topology
fddCfg
CHASSISNAME SUPPORTED_DIST
DCX_93
Brocade300
Brocade6510
CHASSISNAME SUPPORTED_DIST
chassisDistribute
yes
yes
no
no
yes
no
2
125