Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 716

2
portCfgLongDistance
-fecdisable
EXAMPLES
To configure a switch port 63 to support a 100 km link and be initialized using the long distance link
initialization protocol:
To configure desired framesize:
To confgiure average frame size:
SEE ALSO
configure, portCfgISLMode, portCfgTrunkPort, portCfgShow, portShow,
688
Disables Forward Error Correction.
switch:admin> portcfglongdistance 4/15 LS 1 100
switch:admin> portshow 4/15
portCFlags: 0x1
portFlags: 0x20001
portType: 1.1
portState: 2 Offline
portPhys: 4 No_Light
portScn: 0
portId: 013f00
portWwn: 20:3f:00:60:69:00:02:48
Distance: super long <= 100km
portSpeed: 2Gbps
Interrupts: 9 Link_failure: 0
Unknown: 0 Loss_of_sync: 0
Lli: 9 Loss_of_sig:
Proc_rqrd: 0 Protocol_err: 0
Timed_out: 0 Invalid_word: 0
Rx_flushed: 0 Invalid_crc:
Tx_unavail: 0 Delim_err:
Free_buffer: 0 Address_err:
Overrun: 0 Lr_in:
Suspended: 0 Lr_out:
Parity_err: 0 Ols_in:
2_parity_err: 0 Ols_out:
CMI_bus_err: 0
switch:admin> portcfglongdistance 2/35 \
LS 1 -buffers 400
Reserved Buffers = 420
switch:admin> portcfglongdistance 2/35 \
LS 1 -distance 100 -framesize 1024
PRESENT LED
Frjt: 0
Fbsy: 0
9
0
0
0
0
0
0
0
switchShow
Fabric OS Command Reference
53-1002746-01