Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 297

NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
-s | --show [dport]
-c | --clear [dport]
-d | --disable
-e | --enable
-r size | --resize size
-h | --help
EXAMPLES
To display the fabric log:
To change the size of the fabric log:
Fabric OS Command Reference
53-1002746-01
Displays the fabric log. Optionally displays the D_Port logs only.
Clears the fabric log. Optionally clears the D_Port logs only.
Disables the fabric log. By default, the fabric log is enabled.
Enables the fabric log.
Changes the maximum number of log entries. The specified size must be at least
2 and a power of 2; otherwise, the command fails.
Displays the command usage.
switch:admin> fabriclog -s
Time Stamp Input and *Action
Xid
=============================================================================
======
Switch 0; Thu Feb 23 06:55:59 2012 GMT (GMT+0:00)
06:55:59.661357 *Fss Init
06:55:59.661606 *Initiate State
NA
06:55:59.963652 Expd1 0x00000000 0000ffff ffffffff ffffffff F2,NA F2,NA 0
NA
06:56:03.242214 Rcv FSS_RECOV_COLD
NA
06:56:03.242264 D-port Offline Skip Cnt 1(inst = 1)
NA
06:58:44.880675 SCN LR_PORT (0);g=0x22; LR_IN
NA
07:00:12.107354 D-port Offline Skip Cnt 1(inst = 4)
NA
07:00:12.640790 SCN LR_PORT (0);g=0x0; LR_OUT
NA
07:00:12.772930 SCN Port Online;g=0x0;
NA
(output truncated)
switch:admin> fabriclog -r 64
Warning: This command will clear the logs.
Are you sure you want to do the resize [y/n]? y
2
fabricLog
S, P Sn,Pn Port
NA,NA NA,NA NA NA
NA,NA F2,NA NA
F2,NA F2,NA NA
F2,NA F2,NA NA
A2,P0 A2,P0 41
F2,NA F2,NA NA
F2,P0 F2,P0 11
F2,P0 F2,P1 11
269