Diagenablepost - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual
Brocade fabric os command reference v7.1.0 (53-1002746-01, march 2013)
Hide thumbs
Also See for StoreFabric SN6500B:
- User manual (1505 pages) ,
- Reference (934 pages) ,
- Reference manual (370 pages)
Table of Contents
Advertisement
diagEnablePost
Enables the power-on self-test (POST).
SYNOPSIS
diagenablepost
DESCRIPTION
Use this command to enable POST. A reboot is not required for this command to take effect. POST
includes two phases: POST Phase I mainly tests hardware and POST Phase II tests system functionality.
Use the diagPost command to display the current POST status, and use diagDisablePost to disable
POST.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To enable POST:
SEE ALSO
diagDisablePost,
Fabric OS Command Reference
53-1002746-01
switch:admin> diagenablepost
Config update Succeeded
Diagnostic POST is now enabled.
diagPost
2
diagEnablePost
235
- Quick Links:
- Alicreate
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the StoreFabric SN6500B and is the answer not in the manual?
Questions and answers