Secstatsshow - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

secStatsShow

secStatsShow
Displays one or all security statistics.
SYNOPSIS
secstatsshow [name[,"domain[;domain]"]]
DESCRIPTION
Use this command to display one or all security statistics. This command can be issued on any switch to
display local security statistics. If an FCS policy is enabled and secStatsShow is issued on the primary
FCS switch, this command can retrieve and display the security statistics for any or all switches in the
fabric.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
When invoked without operands, this command displays the security statistics on the local switch or
chassis. The following operands are optional:
name
domain
934
Specify the name of the security statistic you want to view. The specified policy
name must be capitalized. If executed on the primary FCS, specify an asterisk (*)
to represent all security policies in the fabric. Valid values for this operand include
the following:
•
TELNET_POLICY
•
HTTP_POLICY
•
SCC_POLICY
•
DCC_POLICY
•
LOGIN
•
INVALID_CERT
•
AUTH FAIL
•
TS_OUT_SYNC
•
NO_FCS
•
INCOMP_DB
•
ILLEGAL_CMD
To access DCC policies, enter DCC_POLICY. Violations are not tracked for
individual DCC policies. The statistics for all DCC_POLICY violations are grouped
together.
Specify one or more domains for which to display the security statistics. Specify an
asterisk (*) in quotation marks to represent all switches in the fabric or specify a
list of domains separated by semicolons. This option can only be executed when
an FCS policy is enabled and the command is issued from the primary FCS
switch. When domain is specified, the name operand is required.
Fabric OS Command Reference
53-1002746-01