Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 966

2
serDesTuneMode
--reset
--show
--autoenable
--autodisable
--autoreset
--autoshow
--help
EXAMPLES
To enable SerDes tuning mode on a DCX-4S chassis with two FC8-16 blades and to display the
configuration:
To disable SerDes tuning mode and reset the SerDes values to defaults and to display the configuration:
To enable SerDes tuning optimization on all backend ports and to display the configuration:
To disable SerDes tuning optimization on all backend ports and retain all current tuning values:
938
Disables SerDes tuning mode and resets SerDes values to default on FC8-16
blades in slots 1, 2 and 7 and on peer ports in the CR4S-8 core blade.
Indicates whether the SerDes tuning mode is enabled or disabled.
Enables SerDes tuning optimization on all backend ports.
Disables further tuning optimization but retains all current tuning values identified
by the algorithm.
Disables further tuning optimization and resets all tuning values back to their
default values. If SerDes tune mode or was set, the configuration is restored.
Displays whether SerDes tuning optimization is enabled or disabled.
Displays the command usage.
switch:admin> serdestunemode --set
serdestunemode is turned on
New serdes values set on slot = 1
New serdes values set on slot = 2
New serdes values set on slot = 7
switch:admin> serdestunemode --show
serdestunemode is enabled
switch:admin> serdestunemode --reset
serdestunemode is turned off
New serdes values reset on slot = 1
New serdes values reset on slot = 2
New serdes values reset on slot = 7
switch:admin> serdestunemode --show
serdestunemode is disabled
switch:admin> serdestunemode --autoset
Autotunemode is turned on
switch:admin> serdestunemode --show
Autotunemode is turned on
switch:admin> serdestunemode --autodisable
Autotunemode is turned off
switch:admin> serdestunemode --show
Autotunemode is turned off
Fabric OS Command Reference
53-1002746-01