Fandisable - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

fanDisable

Disables a fan unit.
SYNOPSIS
fandisable unit
DESCRIPTION
Use this command to disable a nonfaulty fan unit by setting the RPM speed to 0.
NOTES
This command is not available on nonbladed systems except for the Brocade 5300.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
unit
EXAMPLES
To disable a fan unit:
SEE ALSO
fanEnable,
Fabric OS Command Reference
53-1002746-01
Specifies the number of the fan unit to disable.
switch:admin> fandisable 1
Fan unit 1 has been disabled
fanShow
2
fanDisable
281