Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 912

2
rasAdmin
To display the status and configuration of messages that belong to the specified module:
To display the status and configuration of a specified message.
To display the status and configuration for all external messages:
To enable an internal RASlog messages to be sent to syslog (this is done per instruction from support):
To disable an internal RASlog messages to be sent to syslog (this is done per instruction from support):
SEE ALSO
rasMan
884
switch:admin> rasadmin --show module RM
Message Status
RM-1001 ENABLED
RM-1023 ENABLED
RM-1024 ENABLED
RM-1020 ENABLED
RM-1021 ENABLED
RM-1022 ENABLED
switch:admin> rasadmin --show -log IPAD-1002
Message Status
IPAD-1002 DISABLED
switch:admin> rasadmin --show -all
Message Status
FCIP-1000 ENABLED
FCIP-1001 ENABLED
FCIP-1002 ENABLED
switch:admin> rasadmin --enable -syslog RAS-5001
2012/07/20-13:49:35, [LOG-1009], 385, SLOT 4 | CHASSIS, INFO, PLUTO_25,
Internal Log message RAS-5001 has been enabled for syslog logging.
switch:admin> rasadmin --disable -syslog RAS-5001
2012/07/20-13:49:35, [LOG-1009], 385, SLOT 4 | CHASSIS, INFO, PLUTO_25,
Internal Log message RAS-5001 has been disabled for syslog logging.
Default Severity Current Severity
INFO INFO
INFO INFO
INFO INFO
INFO INFO
INFO INFO
INFO INFO
Default Severity Current Severity
INFO INFO
Default Severity Current Severity
CRITICAL CRITICAL
INFO ERROR
INFO INFO
Fabric OS Command Reference
53-1002746-01