Syslogdipremove - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

syslogdIpRemove

Removes a server that is running the syslog daemon.
SYNOPSIS
syslogdipremove ip_address
DESCRIPTION
Use this command to remove a server that is running the syslogd process and to which system
messages are sent from the syslog server configuration on the switch. IPv6 and IPv4 syslogd addresses
are supported. Use syslogdIPShow to view the current syslog server configuration.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
ip_address
EXAMPLES
To remove the IP address 1080::8:800:200C:417A from the list of machines to which system messages
are sent:
SEE ALSO
errShow, syslogdFacility, syslogdIpAdd,
Fabric OS Command Reference
53-1002746-01
Specifies the IP address of the server running syslogd.
switch:admin> syslogdipshow
syslog.1 1080::8:800:200C:417A
switch:admin> syslogdipremove 1080::8:800:200C:417A
syslogdIpShow
syslogdIpRemove
2
1035