Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 889

NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
-ports itemlist
EXAMPLES
To display information from portTest:
SEE ALSO
portLoopbackTest, portTest, spinFab,
Fabric OS Command Reference
53-1002746-01
Displays test results for the specified ports. This operand is optional; if omitted,
data for all ports are displayed. Refer to the itemList help page for further details.
switch:admin> porttestshow 1
Port 1 : PASS
PortType: OTHER
PortInternalState: INIT
Pattern: 0x0 Seed: 0x0
TotalIteration: 0
TotalFail: 0
StartTime: NONE
StopTime: NONE
Timeout: 0
PortState: NO TEST
PortTypeToTest: NO_TEST
UserDelay: 0
CurrentIteration: 0
ConsecutiveFail: 0
ErrorCode: 0
stopPortTest
2
portTestShow
861