Switchviolation - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

switchViolation

switchViolation
Dumps the DCC violations for a switch.
SYNOPSIS
switchViolation --dump -dcc
DESCRIPTION
Use this command to display all Device Connection Control (DCC) violations that have occurred on a
switch. Internally the command searches "errdumpall" for the DCC violations. For each DCC violation,
the command displays the device WWN and the port where the violation occurred.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
This command can be executed on both active and standby CPs. This command does not support High
Availability (HA).
OPERANDS
This command has the following operands. If executed without operands, the command prints the usage.
--dump
-dcc
EXAMPLES
To display DCC violations for a switch:
SEE ALSO
None
1032
Displays specified policy violation.
Specifies the violation type as DCC.
switch:admin> switchviolation --dump -dcc
Device WWN
-----------------------------------
22:00:00:04:cf:75:59:87
Port
10
Fabric OS Command Reference
53-1002746-01