Nbrstateshow - Brocade Communications Systems 8 Command Reference Manual

nbrStateShow

Displays the state of FSPF neighbors.
Synopsis nbrstateshow [slot/][port]
Description Use this command to display information about fabric shortest path first (FSPF) neighbors to the
local switch or information about a neighbor to a specified port. FSPF defines a neighbor as a
remote E_Port interface that is directly attached to the local switch. However, if ports are trunked,
the command displays data only about the trunk master.
This command displays the following fields:
Local Domain ID
Local Port
Domain
Remote Port
State
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
slot
port
Fabric OS Command Reference
53-1001764-02
Domain ID of the local switch.
E_Port interface on the local switch. This value is typically equal to the Index
field reported in the switchShow command.
Domain ID of the remote switch.
E_Port interface on the remote switch.
State of the neighbor. The neighbor can be in one of the following five states:
0 NB_ST_DOWN - The neighbor is down.
1 NB_ST_INIT - The neighbor is initializing.
2 NB_ST_DB_EX - The neighbor and the switch are exchanging data from
their Link State Records (LSR) databases.
3 NB_ST_DB_ACK_WT - The neighbor is waiting for the switch to
acknowledge the LSR database.
4 NB_ST_DB_WT - The LSR Database is in waiting state; synchronization is
in process.
5 NB_ST_FULL - The neighbor is in the last, finishing state. The E_Port can
route frames only if the neighbor is in full state.
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is optional; if omitted, all neighbor
states are displayed.
2
nbrStateShow
519