Diagdisablepost - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

Brocade fabric os command reference v7.1.0 (53-1002746-01, march 2013)

Hide thumbs Also See for StoreFabric SN6500B:

Table of Contents

diagDisablePost

Disables the power-on self-test (POST).

diagdisablepost

Use this command to disable POST. A reboot is not required for this command to take effect. Use the

diagPost command to display the current POST status, and use diagEnablePost to enable POST.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

To disable the POST:

Table of Contents

Do you have a question about the StoreFabric SN6500B and is the answer not in the manual?

Fabric os v7.1.0