Supportshowcfgenable - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

supportShowCfgEnable

Enables a group of commands to be displayed under the supportShow command.
SYNOPSIS
supportshowcfgenable os | exception | port | fabric
| services | security | network | portlog | system
| extend | filter | perfmon | ficon | iswitch | asic_db
| ag | dce_hsl |crypto | fcip
DESCRIPTION
Use this command to enable a group of commands to be displayed under the supportShow command.
Use the supportShowCfgDisable command to disable groups of commands.
The FCIP commands are supported only on the Brocade 7800/FX8-24 platforms and cannot be
configured to collect data on unsupported platforms.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
os
exception
port
fabric
services
security
network
portlog
system
extend
filter
perfmon
ficon
iswitch
Fabric OS Command Reference
53-1002746-01
Enables the OS group commands.
Enables the exception group commands.
Enables the port group commands.
Enables the fabric group commands.
Enables the service group commands.
Enables the security group commands.
Enables the network group commands.
Enables the portlog group commands.
Enables the system group commands.
Enables the extend group commands.
Enables the filter group commands.
Enables the Performance Monitor group commands.
Enables the FICON group commands.
Enables the FC Router group commands.
supportShowCfgEnable
2
997