Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 731

-i index1[-index2]
-slot [slot1[-slot2]
-h
EXAMPLES
To enable a single port persistently:
To enable a range of ports persistently:
To enable multiple port ranges persistently:
To enable a port persistently by specifying its index number:
To enable a range of ports persistently by specifying the corresponding port index range:
To enable multiple ports persistently by specifying multiple port index ranges:
To enable all ports on slots 3-5 persistently:
To display the persistently enabled ports on the switch:
SEE ALSO
ficonCupSet, ficonCupShow, portDisable, portEnable, portCfgPersistentDisable, portCfgShow,
portShow, portSwapDisable, portSwapShow,
Fabric OS Command Reference
53-1002746-01
Persistently enables a port or a range of ports identified by port index numbers.
You may specify multiple index ranges separated by a space, for example, 33-38
40-60.
-f
Ignores nonexisting ports. This operand is valid only with the -i option.
Persistently enables all ports on a slot or on a range of slots, for example, -s 3-5.
Multiple slot ranges are not supported with this command.
Displays the command usage.
switch:admin> portcfgpersistentenable 2/4
switch:admin> portcfgpersistentenable 2/4-8
switch:admin> portcfgpersistentenable 2/24-26 3/10-12 4/3-4
switch:admin> portcfgpersistentenable -i 176
switch:admin> portcfgpersistentenable -i 17-18
switch:admin> portcfgpersistentenable -i 17-18 30-39
switch:admin> portcfgpersistentenable -s 3-5
switch:admin> portcfgpersistentenable
Slot 9 0 1 2
-------+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---
Enabled YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES
(output truncated)
3 4 5 6 7 8
switchShow
portCfgPersistentEnable
9 10 11 12 13 14
2
15
703