Perfdeleemonitor - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

perfDelEEMonitor

perfDelEEMonitor
Deletes one or all end-to-end performance monitors from a port.
SYNOPSIS
perfdeleemonitor [slot/]port [monitorId]
DESCRIPTION
Use this command to delete an end-to-end performance monitor from a port, or all such monitors
associated with a port.
NOTES
This command requires an Advanced Performance Monitoring license.
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE
ports.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
slot
port
monitorId
EXAMPLES
To delete an end-to-end monitor on a port, or all such monitors:
SEE ALSO
perfAddEEMonitor,
600
For bladed systems only, specifies the slot number of the port on which to delete
the monitor, followed by a slash (/).
Specifies the number of the port on which the monitor is to be deleted, relative to
its slot for bladed systems. Use switchShow for a list of valid ports.
Specifies the numeric key of the monitor to be deleted. The key is defined when a
monitor is created. Use perfMonitorShow to determine the monitor key. This
operand is optional. If no operand is specified, this command deletes all
end-to-end monitors associated with the port.
switch:admin> perfdeleemonitor 7/2 5
End-to-End monitor number 5 deleted
switch:admin> perfdeleemonitor 7/2
This will remove ALL EE monitors on port 2, \
continue? (yes, y, no, n): [no] y
perfMonitorShow
Fabric OS Command Reference
53-1002746-01