Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 823

port
-i index1[-index2]
-x [hex1 [-hex2]]
EXAMPLES
To display the current state of a D_Port:
Fabric OS Command Reference
53-1002746-01
Specifies the number of the port to be displayed, relative to its slot for bladed
systems. Use switchShow for a listing of valid port numbers.
Specifies a port or a range of ports identified by port index numbers. You can
specify multiple index ranges separated by a space, for example, 33-38 40-60.
Port indexes are supported only if PortSwap is disabled. They are not supported
on GbE ports and configured F_Port trunks. Use the -i option without a port index
argument to display the portSwap status, or alternately use portSwapShow.
Specifies a port or a range of ports identified by port numbers, index number in
hexadecimal format. You may specify multiple port ranges separated by a space,
for example, -x 21-26 28-3c.
switch:admin> portshow 28
portName: port28
portHealth: No Fabric Watch License
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x10004103
G_PORT D_PORT U_PORT LOGIN LED
LocalSwcFlags: 0x0
portType: 24.0
POD Port: Port is licensed
portState: 1 Online
Protocol: FC
portPhys: 6 In_Sync
port generation number:
state transition count:
portId: 2d1c00
portIfId: 43020028
portWwn: 20:1c:00:05:33:13:2f:b3
portWwn of device(s) connected:
Distance: normal
portSpeed: 8Gbps
FEC: Inactive
LE domain: 0
FC Fastwrite: OFF
Interrupts: 0 Link_failure: 0
Unknown: 0 Loss_of_sync: 1
Lli: 14 Loss_of_sig:
Proc_rqrd: 4 Protocol_err: 0
Timed_out: 0 Invalid_word: 0
Rx_flushed: 0 Invalid_crc:
Tx_unavail: 0 Delim_err:
Free_buffer: 0 Address_err:
Overrun: 0 Lr_in:
Suspended: 0 Lr_out:
Parity_err: 0 Ols_in:
2_parity_err: 0 Ols_out:
CMI_bus_err: 0
PRESENT ACTIVE E_PORT \
portScn: 0 Flow control mode 4
0
1
Frjt:
Fbsy:
2
0
0
0
2
0
0
1
portShow
0
0
2
795