Fciphelp - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

2

fcipHelp

fcipHelp
Displays FCIP command information.
SYNOPSIS
fciphelp
DESCRIPTION
Use this command to display a listing of Fibre Channel over IP (FCIP) commands with short descriptions
for each command. FCIP commands require an FCIP license.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display FCIP command help information:
SEE ALSO
portCfg, portCmd,
292
switch:admin> fciphelp
bladecfggemode
fciphelp
licenseslotcfg
portcfg
portcfggemediatype
portcmd
portshow
portShow
Configure 1GigE/10GigE port configuration
for blade
Print FCIP help info
Configure licenses on a slot basis
Create/Delete a new ip interface/route/arp
entry on the GigE port
Configure media type for GigE port
Execute commands (ping etc) on the GigE port
Show configured ip interfaces/routes/arp
entries or fcip tunnels on the GigE Port
Fabric OS Command Reference
53-1002746-01