Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 556

2
lsCfg
--show
--help
EXAMPLES
To create a base switch:
To create a logical switch identified by fabric ID 2:
To create a base switch with FID 2 without confirmation:
528
-b | -base
Turns an existing logical switch into a base switch. When this command is issued
on a switch that is already a base switch, this command removes the base switch
properties. This command disables the current logical switch. After making the
change, you must re-enable the switch.
-f | -force
Executes the command without confirmation. This operand is optional.
Displays the partition configuration on a switch or chassis. Without any operands,
the command displays all logical switches and the FC ports assigned to them. For
each switch, the FID and switch role are displayed: base switch (BS) or default
switch (DS). The following operands are optional with the --show option.
-ge
Displays partition configuration information for GbE ports. This operand is valid
only on the Brocade 7800/FX8-24 platforms.
-provision
Displays the partition configuration for all slots, regardless of the slot's status. This
operand is valid only on a chassis and can be used with or without the -ge option.
Displays the command usage.
switch:admin> lscfg --create 1 -base
Creation of a base switch requires that the proposed
new base switch on this system be disabled.
Would you like to continue [y/n]?: y
About to create switch with fid=1. Please wait...
Switch successfully created.
Logical Switch has been created with default configurations.
Please configure the Logical Switch with appropriate switch
and protocol settings before activating the Logical Switch.
switch:admin> lscfg --create 2
About to create switch with fid=2. Please wait...
Switch successfully created.
Logical Switch has been created with default configurations.
Please configure the Logical Switch with appropriate switch
and protocol settings before activating the Logical Switch.
switch:admin> lscfg --create 2 -base -force
About to create switch with fid=2. Please wait...
Switch successfully created.
Logical Switch has been created with default configurations.
Please configure the Logical Switch with appropriate switch
and protocol settings before activating the Logical Switch.
Fabric OS Command Reference
53-1002746-01