Supportshowcfgdisable - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

supportShowCfgDisable

Disables a group of commands under the supportShow command.
SYNOPSIS
supportshowcfgdisable os | exception | port | fabric
| services | security | network | portlog | system | extend
| filter | perfmon | ficon | iswitch | asic_db | ag
| dce_hsl | crypto | fcip
DESCRIPTION
Use this command to disable a group of commands under the supportShow command. Use the
supportShowCfgEnable command to enable groups of commands.
The FCIP commands are supported only on the Brocade 7800/FX8-24 platforms and cannot be
configured to collect data on unsupported platforms.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
os
exception
port
fabric
services
security
network
portlog
system
extend
filter
perfmon
ficon
iswitch
Fabric OS Command Reference
53-1002746-01
Disables the OS group commands.
Disables the exception group commands.
Disables the port group commands.
Disables the fabric group commands.
Disables the service group commands.
Disables the security group commands.
Disables the network group commands.
Disables the portlog group commands.
Disables the system group commands.
Disables the extend group commands.
Disables the filter group commands.
Disables the Performance Monitor group commands
Disables the FICON group commands.
Disables the FC Router group commands.
supportShowCfgDisable
2
995