Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 231

•
•
•
Use the --show -LUN command for a listing of Crypto LUN status or configuration information for a
specific CTC.
When used with -stat the display includes the following LUN runtime status information:
•
•
•
•
•
•
•
•
•
•
•
•
•
Fabric OS Command Reference
53-1002746-01
Encryption mode: encrypt or cleartext
Encryption format: native or DF compatible
Configuration status: committed or defined
Container name: user-defined label
Type: disk or tape
EE node: node WWN
EE slot: EE slot number
Target: target port WWN and node WWN
Target PID
VT: virtual target port WWN and node WWN
VT PID: virtual target PID
Number of hosts: numeric value
Number of rekey (or tape) sessions: numeric value
For each host:
-
Host PWWN, NWWN: host port WWN and node WWN
-
Host PID: host port ID
-
VI PWWN, NWWN: virtual initiator port WWN and node WWN
-
VI PID: virtual initiator port ID
Number of LUNs: numeric value
For each LUN:
-
LUN number: numeric value
-
LUN type: disk, tape drive, tape medium changer, tape attached medium changer,
offline/unknown, or unsupported/other
-
LUN serial number: alpha-numeric ID
-
Encryption mode: encrypt or cleartext
-
Encryption format: native or DF-compatible
-
Encrypt existing data: enabled or disabled
-
Rekey: enabled or disabled
-
Tape policy type: pool-based or LUN-based
-
Key life: key lifespan in days
-
Volume/pool label
-
LUN state: Refer to the Fabric OS Encryption Administrator's Guide.
-
Encryption algorithm: AES256 -XTS (disk), AES256-CCM (tape), or none
-
Compression algorithm
-
Key ID state: available or not available
-
Key ID: numeric identifier if available
-
New LUN: Yes or No
-
Replication LUN type: Primary or Mirror
If the LUN is a disk and the LUN is enabled for auto rekey, the following additional information is
displayed below the Key ID. Refer to the example section for an illustration.
-
Key creation time: date and time
-
Key life: remaining time (in days) until the key expires
2
cryptoCfg
203