Fwclassinit - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual
Brocade fabric os command reference v7.1.0 (53-1002746-01, march 2013)
Hide thumbs
Also See for StoreFabric SN6500B:
- User manual (1505 pages) ,
- Reference (934 pages) ,
- Reference manual (370 pages)
Table of Contents
Advertisement
2
fwClassInit
fwClassInit
Initializes all classes under Fabric Watch.
SYNOPSIS
fwclassinit
DESCRIPTION
Use this command to initialize all classes under Fabric Watch. The command should only be used after
installing a Fabric Watch license to start licensed Fabric Watch classes. Refer to the Fabric Watch
Administrator's Guide for a list of supported Fabric Watch classes.
NOTES
This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To initialize all classes under Fabric Watch:
SEE ALSO
fwConfigReload, fwHelp, portFencing, portThConfig, thConfig,
412
switch:admin> fwclassinit
fwClassInit: Fabric Watch is updating...
fwClassInit: Fabric Watch has been updated.
sysMonitor
Fabric OS Command Reference
53-1002746-01
- Quick Links:
- Alicreate
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the StoreFabric SN6500B and is the answer not in the manual?