Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 685

To enable the port autodisable feature for a range of ports, some of which were previously enabled (the
configuration is applied only to those ports, for which an update is necessary, that is, port 3 in the
following example):
To suspend the port autodisable configurations:
To resume the suspended port autodisable configurations:
SEE ALSO
portCfgShow,
Fabric OS Command Reference
53-1002746-01
Port will not be automatically disabled.
Port Auto Disable: ON
MODE : RESUME
Configured Option(s):No events configured.
Port will not be automatically disabled.
switch:admin> portcfgautodisable --enable 0-3
Same configuration for port 0
Same configuration for port 1
Same configuration for port 2
switch:admin> portcfgautodisable --suspend
Suspending Port Auto Disable will de-activate the triggers \
for all ports configured with Port autodisable conditions on this Logical
Switch.
Would you like to continue [y/n]?: y
PAD option is set to 'SUSPEND'
switch:admin> portcfgautodisable --show 18
Port Auto Disable: ON
MODE : SUSPEND
Configured Option(s): LOSG
switch:admin> portcfgautodisable --resume
PAD option is set to 'RESUME'
switch:admin> portcfgautodisable --show 18
Port Auto Disable: ON
MODE : RESUME
Configured Option(s): LOSG
portEnable
OLS NOS LIP
OLS NOS LIP
portCfgAutoDisable
2
657