Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 877

OPERANDS
This command has the following operands:
slot
[ge]port
-i index1[-index2]
-f
-x [hex1 [-hex2]]
-slot [slot1[-slot2]
ge
ip
fcip
-h
EXAMPLES
To display the basic set of statistics for port 1/13 on a Condor3-based platform:
Fabric OS Command Reference
53-1002746-01
For bladed systems only, specifies the slot number of the port to be displayed,
followed by a slash (/).
Displays statistics for a single port identified by the port number, relative to its slot
on bladed systems. Specify the optional ge option to display the GbE port
hardware statistics. Port ranges are not supported with this command. Use
switchShow for a listing of valid ports.
Displays statistics for a single port or for a range of ports identified by port index
numbers. You may specify multiple index ranges separated by a space, for
example, -i 33-47 65-73.
Ignores nonexisting ports. This operand is valid only with the -i option.
Specifies a port or a range of ports identified by port index numbers in
hexadecimal format. You may specify multiple port ranges separated by a space,
for example, -x 21-26 28-3c.
Displays statistics for all ports on a slot or on a range of slots, for example, -s 3-5.
You may specify multiple slot ranges separated by a space, for example, -s 3-5
8-10.
Displays the GbE port statistics.
Displays all GbE port statistics related to IP addresses that are not zero. This
operand is not supported on the Brocade 7800 and FX8-24 platforms.
ip_address
Specifies an IP address to display statistics only for the specified IP address. This
operand is optional and valid only with the ip option.
Displays the GbE statistics on all FCIP tunnels. This operand is not supported on
the Brocade 7800 and FX8-24 platforms.
tunnel_number
Specifies a tunnel ID to display statistics only for the specified FCIP tunnel. This
operand is optional and valid only with the fcip option.
Displays the command usage.
switch:admin> portstatsshow 1/13
stat_wtx
stat_wrx
stat_ftx
stat_frx
stat_c2_frx
stat_c3_frx
stat_lc_rx
stat_mc_rx
stat_mc_to
0 4-byte words transmitted
0 4-byte words received
0 Frames transmitted
0 Frames received
0 Class 2 frames received
0 Class 3 frames received
0 Link control frames received
0 Multicast frames received
0 Multicast timeouts
2
portStatsShow
849