Portstatsshow - Brocade Communications Systems StoreFabric SN6500B Command Reference Manual

portStatsShow

Displays port hardware statistics.
SYNOPSIS
portstatsshow [slot/]port
portstatsshow -i [index1[-index2][...] [-f]]
portstatsshow -x [hex1[-hex2] [...]]
portstatsshow -slot [slot1[-slot2][...]
portstatsshow ge [slot/]ge port
portstatsshow ip [slot/]ge port [ip_address]
portstatsshow fcip [slot/]ge port [tunnel_number]
portstatsshow -h
DESCRIPTION
Use this command to display port hardware statistics counters. Some counters are platform- or
port-specific and display only on those platforms and ports. All statistics have a maximum 32-bit value of
4,294,967,295.
You can display statistics of a single port to be cleared by its port number or by its port index number in
decimal or hexadecimal format. Port ranges are supported with port numbers, index numbers(decimal or
hexadecimal) or by specifying a slot or a slot range. Use switchShow for a listing of valid ports, slots,
and port index numbers.
Specifying multiple ports with the index (-i) or slot (-s) option is supported only if PortSwap is disabled.
They are not supported on GbE ports and configured F_Port trunks. Use the -i option without a port index
to display the portSwap status, or alternately use portSwapShow.
The command output may include the following fields (Tx indicates frames transmitted by the port; Rx
indicates frames received by the port).
stat_wtx
stat_wrx
stat_ftx
stat_frx
stat_c2_frx
stat_c3_frx
stat_lc_rx
stat_mc_rx
stat_mc_to
Fabric OS Command Reference
53-1002746-01
The number of 4-byte words transmitted.
The number of 4-byte words received.
The number of frames transmitted.
The number of frames received.
The number of class 2 frames received.
The number of class 3 frames received.
The number of link control frames received.
The number of multicast frames received.
The number of multicast timeouts.
2
portStatsShow
845