Managing Hardware Setup - Cisco CTS-3010 Administration Manual

Managing Hardware Setup

Managing Hardware Setup
You can manage and test the following Cisco TelePresence System components:
•
•
•
•
•
•
•
Before You Begin
Before you begin testing and troubleshooting your system, check the system displays. All of the
Cisco TelePresence Administration application Hardware Setup features require the use of the displays
in the meeting room. Therefore, we recommend the following:
1.
2.
Note You must test the speakers before testing the microphones because the microphone test depends on
speakers that are functioning properly. See the
Figure 9-1
you with troubleshooting tasks.
Cisco TelePresence System Release 1.6 Administration Guide
9-2
Managing Displays, page 9-3
Testing Cameras, page 9-6
Testing Speakers, page 9-17
Testing Microphones, page 9-19
Testing the External Presentation Display, page 9-23
Testing Presentation Devices, page 9-24
Testing Other Devices, page 9-30
Verify that the displays work by using the Hardware Setup > Displays tests in this section.
If the displays are showing the correct images, you can proceed to testing the cameras, speakers, and
microphones, as needed.
shows an example of the Cisco TelePresence System administrative tools available to assist
Chapter 9 Troubleshooting the CTS 3010 and CTS 3210
"Testing Speakers" section on page 9-17.
OL-13676-05