Chapter 8
Troubleshooting the CTS 3000 and CTS 3200
Figure 8-1
you with troubleshooting tasks.
Figure 8-1
CTS initial setup is also performed using the Hardware Setup fields. For information on how to configure
CTS for the first time, see the following documentation:
•
•
Managing Displays
A display is set up successfully when the color on the display has been adjusted for the lighting in the
meeting room.
Note
Each display must be adjusted individually.
Use the information in the following sections to adjust the display for your system:
•
•
•
•
OL-13676-05
shows an example of the Cisco TelePresence System administrative tools available to assist
Troubleshooting Window
Cisco TelePresence System 3000 Assembly, Use & Care, and Field Replacement Unit Guide
Cisco TelePresence System 3200 Assembly, Use & Care, and Field Replacement Unit Guide
Selecting the Light Level, page 8-4
Adjusting Your Display, page 8-5
Troubleshooting Displays, page 8-5
Related Information, page 8-6
Cisco TelePresence System Release 1.6 Administration Guide
Managing Hardware Setup
8-3