Generate Detailed Message Reports; Related Sip Messages - Cisco CTS-3010 Administration Manual

Managing Log Files

Generate Detailed Message Reports

To see additional details associated with a SIP message, follow these steps:
Double-click on a SIP message from the list to open the SIP Message Details dialog box. The SIP
Step 1
Message Details dialog box opens containing the message details and
Or
Step 2 Highlight the SIP message and click the Details button. The SIP Message Details dialog box opens
containing the message details and

Related SIP Messages

The bottom portion of the SIP Message Details window lists SIP messages that are related to the SIP
message that was selected at the top of the window.
To view related SIP message details, follow these steps:
Double-click a message in the
Step 1
Requests and Methods
Click Close to dismiss this window.
Step 2
Use the information in the following sections to initiate SIP requests and responses:
•
•
SIP Requests and Methods
Table 4-9
Administration software. The first column lists the RFC that describes the SIP request messages or
method.
Table 4-9 Supported SIP Requests and Methods
RFC Request/Method
3261 ACK
3261 BYE
3261 CANCEL
2976 INFO
3261 INVITE
3265 NOTIFY
3261 OPTIONS
Cisco TelePresence System Release 1.6 Administration Guide
4-36
and SIP Response Categories
SIP Requests and Methods, page 4-36
SIP Response Categories, page 4-37
summarizes the SIP requests and methods supported by the Cisco TelePresence System
Description
Confirms that the client has received a final response to an INVITE request.
Terminates a call. Can be sent by either the caller or the called party.
Cancels any pending searches but does not terminate any call currently in progress.
Allows session-related control information generated during a session to be carried along
the SIP signaling path.
Indicates that a user or service is being invited to participate in a call session.
Immediately upon successful accepting or refreshing of a subscription, a NOTIFY message
is sent to communicate the current resource state to the subscriber. This NOTIFY message
is sent in the same dialog as that created by the SUBSCRIBE message.
Queries the capabilities of servers.
Related SIP Messages.
Related SIP Messages window to see details for that message.
are explained below.
Chapter 4 Troubleshooting the CTS 500
Related SIP Messages.
SIP
OL-13676-05