Related Information; System Settings - Cisco CTS-3010 Administration Manual

System Settings

Table 3-4
Field
SNMP Configuration
Trap Receiver Configuration
Step 3 Use Cisco Unified CM to make changes to the SNMP settings. See the
Manager Configuration Guide for the Cisco TelePresence

Related Information

For more information about SNMP, see the
on Cisco.com.
System Settings
The System Settings window displays read-only information about the system settings for the
Cisco TelePresence System that were set in the Cisco Unified CM configuration.
To view system settings, follow these steps:
Cisco TelePresence System Release 1.6 Administration Guide
3-14
SNMP Settings
Settings
Parameters that access the SNMP server associated with this
Cisco TelePresence System. Cisco Unified CM for CTS supports
SNMP Version 2c and Version 3. SNMP fields displayed in CTS
reflect the configured SNMP version. The following fields are
included:
• SNMP Enabled
• User Name
• Security Level
• Authentication Algorithm
• Encryption
System Location
•
• System Contact
SNMP settings for the receiver to which this Cisco TelePresence
system will send traps. The following information is shown for
Traps 1 through 5:
Trap Receiver
•
IP Address
•
User Name
•
Security Level
•
Authentication Algorithm
•
Encryption
•
• Community String
Chapter 3 Configuring the Cisco TelePresence System
System.
Simple Network Management Protocol (SNMP)
Cisco Unified Communications
home page
OL-13676-05