Understanding Camera Setup Choices For Room Lighting - Cisco CTS-3010 Administration Manual

Chapter 6 Troubleshooting the CTS 1100
Figure 6-14

Understanding Camera Setup Choices for Room Lighting

If your room has windows that contribute a significant amount of natural light, you can set your CTS to
automatically compensate for variable lighting conditions. This compensation is an average adjustment
and will not be as accurate as the color settings you select for a room that uses fixed, artificial room
lighting.
Table 6-2
display and camera. See the
Table 6-2
Physical Room Configuration
No windows, or all external light is covered or blocked Disable
One window
Two adjacent windows (corner office configuration)
Two opposing windows
Windows on three sides
Windows on four sides
1. Cisco recommends that you cover at least one of the windows.
OL-13676-04
Replacing the Camera Cover
Cover
release
screws
Cover
release
screws
contains recommendations for desirable display and camera settings when you set up the
"Testing the CTS 1100 Camera" section on page 6-6
Room Configuration and Camera Setup Choices
1
Camera Auto Brightness and 
Camera Auto Color Balance Setup Choices
Enable
Enable
Enable
Enable
Enable
Cisco TelePresence System Release 1.5 Administrator Guide
Managing Hardware Setup
for more information.
6-17