Cisco CTS-3010 Administration Manual page 62

Administration guide
Hide thumbs Also See for CTS-3010:
Table of Contents

Advertisement

Telephony Settings
Choose Configuration > Telephony Settings.
Step 1
View the telephony settings described in
Step 2
Table 3-3
Field
Auto Answer
Maximum Call Length (mins)
DSCP For Audio
DSCP For Video
Cisco TelePresence System Release 1.6 Administration Guide
3-12
Table
Telephony Settings
Settings
Displays the automatic answering capability on the phone.
Yes indicates that automatic answering has been enabled.
No indicates that automatic answering has been disabled.
Displays the defined limit to the number of minutes allowed for a
call. The default setting is 0 minutes, which means no limit to call
duration is set. The maximum number of minutes that can be set is
10080 (7 days).
The call will automatically end at the number of minutes set. When
the default setting is used, the call is never ended automatically.
Displays the traffic queuing techniques that define per-hop behavior
based on the Differentiated Services Code Point (DSCP) value in the
IP header of a packet. The following DSCP settings apply for both
audio and video traffic:
AF11 DSCP (001010)
AF12 DSCP (001100)
AF13 DSCP (001110)
AF21 DSCP (010010)
AF22 DSCP (010100)
AF23 DSCP (010110)
AF31 DSCP (011010)
AF32 DSCP (011100)
AF33 DSCP (011110)
AF41 DSCP (100010)—Recommended value
AF42 DSCP (100100)
AF43 DSCP (100110)
CS1 (precedence 1) DSCP (001000)
CS2 (precedence 2) DSCP (010000)
CS3 (precedence 3) DSCP (011000)
CS4 (precedence 4) DSCP (100000)
CS5 (precedence 5) DSCP (101000)
CS6 (precedence 6) DSCP (110000)
CS7 (precedence 7) DSCP (111000)
Default DSCP (000000)
EF DSCP (101110)
Chapter 3
Configuring the Cisco TelePresence System
3-3.
OL-13676-05

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Telepresence system

Table of Contents