Table of Contents
Advertisement
Managing Hardware Setup
Related Information
For more information about setting up and testing cameras, see the following documentation:
•
•
•
Testing Speakers
The speakers are set up successfully when sound can be heard clearly from each one. When running a
test, you can choose whether to cycle through the speakers automatically or manually.
Use the information in the following sections to test the speakers for your system:
•
•
•
Testing the Speakers
To test the speakers, follow these steps:
Log in to the Cisco TelePresence System Administration window.
Step 1
Choose Troubleshooting > Hardware Setup
Step 2
Click the Speakers radio button.
Step 3
Step 4
Click Start to begin the speaker test.
Click Cycle Through Speakers to have sound cycled automatically for 5 seconds on each speaker.
Step 5
Step 6
Click Manually Step Through Speakers to test sound on each speaker.
Step 7
Click Next Speaker to progress to the next speaker.
Step 8
Click Stop to end testing.
Cisco TelePresence System Release 1.6 Administration Guide
8-16
Cisco TelePresence System 3000 Assembly, Use & Care, and Field Replacement Unit Guide
Cisco TelePresence System 3200 Assembly, Use & Care, and Field Replacement Unit Guide
For more system troubleshooting information, see the
Guide
on Cisco.com.
Testing the Speakers, page 8-16
Troubleshooting Speakers, page 8-17
Related Information, page 8-17
Chapter 8
Troubleshooting the CTS 3000 and CTS 3200
Cisco TelePresence System Troubleshooting
OL-13676-05
Advertisement
Table of Contents
Troubleshooting
