Table of Contents
Advertisement
Chapter 4
Troubleshooting the CTS 500
Step 5
Click Show Camera Target. The Camera Target testing options appear, as shown in
Figure 4-2
Step 6
Prepare the large camera target and place it on the easel.
Step 7
Set the easel and large target in the position that the user will occupy. Use the distance measured from
the camera to the head of the user to position the target. If the distance is unknown, use 1.5 meters
(5 feet).
The user must be at least 4 feet (1.2 meters) away from the display for all CTS-500 installations.
Note
Figure 4-3
installations.
OL-13676-05
Cameras Screen
shows a pedestal stand-mounted CTS 500. Use the same method for all types of CTS 500
Cisco TelePresence System Release 1.6 Administration Guide
Managing Hardware Setup
Figure
4-2.
4-7
Advertisement
Table of Contents
Troubleshooting
