Table of Contents
Advertisement
Chapter 1
Using the Cisco TelePresence System Administration Interface
Move your mouse over the colored icons in the System Status box to display dialog boxes containing the
Step 1
state of each piece of equipment. For example, rolling your mouse over the green check-mark icons in
Figure 1-2
Figure 1-2
Or
Step 2
Click the Status Detail button (the magnifying glass icon) in the upper right corner of the System Status
box. The Tooltip Box appears.
Step 3
Move your mouse over the colored icons to see the detailed state of the equipment, as in
Device Status Indicators
CTS devices include the following:
•
•
•
•
•
The System Status box shows the following icons for the camera, display, documentation camera,
projector, and room IP phone for the conditions indicated.
OL-13676-05
will show the detailed state of the equipment.
System Status Window
Cameras
Displays
Document Camera
Projector/Display
Room IP Phone
•
Ellipses or Black Dot—Microphone is not expected or
microphone is not connected.
•
Green check mark—Device is configured and operational.
•
Hourglass—Device status is unknown or is being
determined.
Cisco TelePresence System Release 1.6 Administration Guide
System Status
Step
1.
1-3
Advertisement
Table of Contents
Troubleshooting
