Chapter 3
Configuring the Cisco TelePresence System
IP Settings
This section contains the following topics:
•
•
•
Viewing IP Settings
Note
Use Cisco Unified Communications Manager (Cisco Unified CM) to make changes in the IP Settings
window. See the
Cisco TelePresence
The IP Settings window displays the Cisco TelePresence System (CTS) MAC address and hostname and
you can view and manage the following:
•
•
•
•
•
To view and manage IP settings, follow these steps:
Step 1
Choose Configuration > IP Settings.
Step 2
Configure settings for the Cisco TelePresence System uplink to your network using the information in
Table
Step 3
Click Apply to register new or modified settings.
Step 4
Click Reset to restore the original settings.
Note
All codecs on the system must be connected and enabled for the factory reset to complete. To register a
device, see the "Optional Hardware" section of the
Configuration Guide for the Cisco TelePresence
Table 3-1
Field or Button
MAC Address:
Host Name:
OL-13676-05
Viewing IP Settings, page 3-5
Configuring a Static IP Address for Networks That Do Not Use DHCP, page 3-6
Configuring an Alternate TFTP Server (Optional), page 3-9
Cisco Unified Communications Manager Configuration Guide for the
System.
DHCP—Select a static IP address, which allows the Cisco IP phone to be configured so that the
system recognizes it as a device in the network, rather than a router.
Domain name
IP Address
Default gateway
DNS servers.
3-1.
IP Settings
Setting
MAC address of the CTS primary codec.
Host name of the CTS primary codec.
Cisco Unified Communications Manager
System.
Cisco TelePresence System Release 1.6 Administration Guide
IP Settings
3-5