Standby Status; Xstatus Standby State; Systemunit Status; Xstatus Systemunit Hardware Module Compatibilitylevel - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

Standby status

xStatus Standby State

Shows whether the system is in standby mode or not.
Standby: The system is in standby state.
EnteringStandby: The system is entering the standby state.
Halfwake: The system is in standby, but greets the user when presence is detected by motion
or the Proximity pairing app.
Off: The system is not in standby.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
Standby/EnteringStandby/Halfwake/Off
Example:
xStatus Standby State
*s Standby State: Off
** end
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration xCommand

SystemUnit status

xStatus SystemUnit Hardware Module CompatibilityLevel

The Cisco TelePresence endpoints are using a NAND flash memory for general storage. The
endpoints running TC software are manufactured with a new version of the flash memory.
Endpoints having the new version of the flash memory must run software TC4.2.1 or later. Some
previous TC software versions are updated to support the new flash memory. Please check the
release note to find if the new version of the flash memory is supported. If your endpoint does
not have the CompatibilityLevel command it does not have the new flash memory installed.
The result returned when running the command is either 0 or 1:
0 = The system does not have the new flash memory installed.
1 = The system has the new flash memory installed. If downgraded, it can only be downgraded
to previous TC software versions having support for the new version of the flash memory.
Requires user role: ADMIN, USER
Value space of the result returned:
1/0
Example:
xStatus SystemUnit Hardware Module CompatibilityLevel
*s SystemUnit Hardware Module CompatibilityLevel: 1
** end

xStatus SystemUnit Hardware Module SerialNumber

Shows the serial number of the hardware module in the codec.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus SystemUnit Hardware Module SerialNumber
*s SystemUnit Hardware Module SerialNumber: "F9AA99A00090"
** end
176
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.