Related Information; Testing The External Presentation Display; Testing Presentation Devices - Cisco CTS-3010 Administration Manual

Administration guide
Hide thumbs Also See for CTS-3010:
Table of Contents

Advertisement

Managing Hardware Setup

Related Information

For more information about setting up and testing displays, see the
Assembly, Use & Care, and Field Replacement Unit
For more system troubleshooting information, see the
Guide

Testing the External Presentation Display

By default, presentations are displayed as presentation-in-picture (PiP) on the main display screen. You
can optionally add an external presentation display screen that displays the presentation instead of
displaying it as PiP. This external display is attached to the External Presentation Display HD video
connection on the codec. See the
Field-Replaceable Unit Guide
Note
If the video works for a few minutes and then stops working, your presentation device might use an
unsupported video protocol. To see the list of displays that the CTS 500 supports, see the release notes
for your CTS software version on Cisco.com.
A PiP softkey will be displayed on the phone only if a PiP is active. Pip is not available for audio-only
calls.
To test an external presentation device, follow these steps:
Log in to the Cisco TelePresence System.
Step 1
Navigate to Troubleshooting > Hardware Setup > Presentation Devices.
Step 2
Click the Test Pattern radio button.
Step 3
Step 4
Click Start to begin the test.
The test pattern should display on the external presentation display.
Step 5
Click Stop to end the testing.

Testing Presentation Devices

The output for presentations is handled by alternate displays, projectors, alternate devices, or LCDs.
Input one of these devices can be delivered through a Video Graphics Array (VGA) input device (such
as a laptop computer) or through a document camera.
You should run this test only if you have presentation display devices installed.
Note
Table 4-6
Cisco TelePresence System Release 1.6 Administration Guide
4-22
on Cisco.com.
for more information.
contains supported presentation devices listed by system.
Guide.
Cisco TelePresence System Troubleshooting
Cisco TelePresence System 500 Assembly, Use & Care, and
Chapter 4
Troubleshooting the CTS 500
Cisco TelePresence System 500
OL-13676-05

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Telepresence system

Table of Contents