Related Information; Testing Audio - Cisco CTS-3010 Administration Manual

Testing Audio

Choose the number of rows that you wish to see on one page from the Rows Per Page drop-down menu.
Step 1
Double click to select and open single message details. The SIP Message Details window appears.
Step 2
If there are multiple pages listing log files, click the First, Previous, Next, or Last button to navigate to
Step 3
the desired page.
Click the radio button to the left of the table entry, and then click Clear to delete a single error message.
Step 4
Click Clear All to delete all error messages displayed.
Step 5

Related Information

For more information, see the following documentation:
•
•
Testing Audio
You can test the system audio in your meeting room and send the results to Cisco Systems technical
support for analysis.
Note Audio recordings can be made only while the CTS system is in a call.
To record audio, follow these steps:
Choose Troubleshooting > Audio.
Step 1
Click Start Recording Audio to start recording all audio in the local meeting room including audio from
Step 2
remote meeting rooms. Recording will continue up to a maximum of two minutes unless you manually
stop recording.
Both endpoints will beep periodically during the recording process and when audio add-in participants
Note
join the call.
Step 3 Click Stop Audio Recording to stop recording.
After you complete the recording and download the results, send the results to Cisco Systems technical
Step 4
support.
Related Information
For more system troubleshooting information, see the
Guide
Cisco TelePresence System Release 1.6 Administration Guide
9-38
Session Initiation Protocol (SIP)
Cisco TelePresence System Message Guide
on Cisco.com.
Chapter 9
home page on Cisco.com.
Cisco TelePresence System Troubleshooting
Troubleshooting the CTS 3010 and CTS 3210
OL-13676-05