Chapter 6
Troubleshooting the CTS 1100
Table 6-12
Troubleshooting Cisco TelePresence Network Cabling (continued)
Problem
Cisco Telepresence
phone idle screen does
not appear.
Note
For more system troubleshooting information, see the
Cisco.com.
Where to Go Next
See
For information about system messages that may appear on the Cisco TelePresence system, see the
Cisco TelePresence System Message Guide on the
and System Messages
OL-13676-04
Possible Cause
Device configuration has not been
done or has been done incorrectly.
Chapter 10, "Monitoring the Cisco TelePresence System."
home page on Cisco.com.
Actions
Log into the Cisco Unified Communications Manager
•
administration interface.
Verify that the required settings have been made for
•
configuring the Cisco TelePresence system and
Cisco Unified IP Phone. See the
Communications Manager Configuration Guide for the
Cisco TelePresence
Cisco TelePresence System Troubleshooting Guide
Cisco TelePresence Administration Software Error
Cisco TelePresence System Release 1.5 Administrator Guide
Where to Go Next
Cisco Unified
System.
on
6-41